1-PC BALL VALVE HIGH PRESSURE
WORKING PRESSURE: 2000 CWP
END CONNECTION: FEMALE THREADED ENDS
AVAILABLE SIZE: ¼" - 2"
(DN8 - DN50)
MATERIAL: A108 / CF8M
ACCEPTABLE OTHER MATERIAL OF CF8M (SS316) / CF8 (SS304) WITH MINIMUM ORDER QUANTITY.
LEVER OPERATION (-NL)
Blow-Out-Proof Stem Design
NACE MR 01 75
1-PC Ball Valve means the valve cannot be taken apart for cleaning. The advantage is that the valve will be low cost and robust. As a result of the valve body being one piece is that a smaller ball has to be used leading to a reduced port, more commonly called a reduced bore. This means that flow is reduced through the valve, since the ball bore is one size smaller than the pipe size.
In Reduced port (more commonly known as reduced bore) ball valves,
flow through the valve is one pipe size smaller than the valve's pipe size
resulting in flow area being smaller than pipe.
Ball Valve– A floating ball valve is not held in place by a trunnion, and
instead is attached only to the stem. This sometimes causes the ball to float
slightly downstream. However, when this happens, the ball presses against the
seat, creating a positive seal.
Production of chemicals,
Gas Industry, Oil refineries, Water