Please select which you want to ask the following product specifications：
3-PC HIGH WORKING PRESSURE BALL VALVE
DELRIN / PEEK SEAT
WORKING PRESSURE: PN500
END CONNECTION: FEMALE THREADED ENDS
AVAILABLE SIZE: ⅜" (DN10)
MATERIAL: S45C OR CF8M WITH MINIMUM ORDER QUANTITY.
ACCEPTABLE OTHER MATERIAL OF CF8M (SS316) / CF8 (SS304)/ CF3M (SS316L) WITH MINIMUM ORDER QUANTITY.
BAR STANDARD PN500
A full port or more commonly known full bore ball valve has an over-sized ball so that the hole in the ball is the same size as the pipeline resulting in lower friction loss. Flow is unrestricted but the valve is larger and more expensive so this is only used where free flow is required, for example in pipelines which require pigging.
Floating Ball Valve– A floating ball valve is not held in place by a trunnion, and instead is attached only to the stem. This sometimes causes the ball to float slightly downstream. However, when this happens, the ball presses against the seat, creating a positive seal.
Ball Valves for Hydraulic Oils, Heating Oils
Production of chemicals,
Gas Industry, Oil refineries, Water treatment,